Manual BuggyFix

📦 BuggyFix – Kit Contents

Check that your BuggyFix kit contains the following parts before you start the installation:

  1. BuggyFix main plate
  2. Front bracket
  3. Rear bracket
  4. 3x Allen screw
  5. 3x Washer
  6. Side clip
  7. Spacer
  8. 3x Transparent adhesive film

🛠 Installation Instructions

Follow the steps below to install the BuggyFix onto the Urban Arrow Essential V2 rear carrier. Make sure the bike is stable (for example in a stand) before you start.

Please note:

On some rear carriers, slight movement at the brackets may occur due to variations in the thickness of the carrier’s coating.

If the BuggyFix does not click in firmly or moves after installation, use the included transparent adhesive film to create a tighter fit. Three pieces of film are included and can be trimmed to size. Apply as needed to ensure the BuggyFix sits securely without movement.

⚠️ Safety Instructions

Intended Use

  • The BuggyFix is designed exclusively for transporting compact strollers in combination with the Urban Arrow Family or Family Next equipped with the original Urban Arrow Essential V2 rear carrier.
  • Always ensure your stroller is suitable for use with the BuggyFix. It must hang by its handlebar and remain stable and fully folded during the ride.
  • Perform a short test ride before regular use.

Load Capacity

  • The maximum load capacity of the BuggyFix is 10 kg. Do not exceed this limit.

Before Every Ride

  • Ensure no loose straps, cords, or accessories can become caught in the wheel, brake disc, or other bike components.
  • Check that the stroller’s folding mechanism is properly locked.
  • Verify that the stroller is positioned correctly and securely on the BuggyFix.
  • Only use the product when all components are correctly installed.

Damage & Replacement

  • Do not use the product if any part is broken, torn, bent, deformed, or missing.
  • Only use original Studio Vollebak replacement parts.

💡 Tip

Vibrations during cycling may cause damage if hard surfaces of the stroller touch the bike or the BuggyFix. Apply self-adhesive felt to these areas to prevent scratches or wear.

🧽 Maintenance

  • Clean the BuggyFix regularly with a damp cloth. For stubborn dirt, use a mild cleaning agent.
  • Dry the product with a soft cloth after cleaning.
  • If the product becomes wet, let it dry completely before use or storage.
  • Avoid exposing the product to direct sunlight for extended periods. Long-term UV exposure may cause material degradation or discoloration.